Tripp Lite's PDU1230 offers 208/240V power distribution with L6-30P input plug, 15-foot cord and 20 total output receptacles. Features 4 front-panel C19 outlets, each protected by separate 15A circuit breakers, 4 front-panel C13 outlets and 12 rear-panel C13 outlets protected in banks of 4 by 4 separate 10A circuit breakers. Detachable mounting flanges are configurable for wallmount, under-counter or 1U/0U rackmount installation. Uses only 1 rack space (1U) when installed in any 19-inch rack, with the potential for 0U vertical mounting in the cable area of most rack enclosures. Detachable flanges with pre-punched access holes and adjustable depth channels allow user configuration in dozens of potential mounting schemes. Attractive housing with 8 front-facing and 12 rear-facing outlets measures only 5.2 inches in depth. Unfiltered electrical pass-through without a power switch makes the PDU1230 ideal for distributing alternate waveform UPS or generator power in rack enclosures.

• Power Rating: 4.99 kVA
• Input Receptacles: NEMA L6-30P
• Output Receptacles: 20
• Input Voltage: 208 V AC
• Input Voltage: 240 V AC
• Output Voltage: 208 V AC
• Output Voltage: 240 V AC
• Current: 30 A Input Current
• Form Factor: 1U Rack-mountable
• Form Factor: Zero U Vertical Rackmount
• Power Cord/Cable: 15 ft
• Height: 1.8"
• Width: 17.5"
• Depth: 5.2"
• Weight (Approximate): 7.50 lb

Product may differ from image shown

- Corded AC power distribution unit with L6-30P input plug, 2 C19 outlets, 4 C13 outlets (front) and 12 C13 outlets (rear) - Versatile all-metal cabinet with detachable mounting flanges allows wallmount, under-counter and 19-inch rackmount mounting in both 1U or 0U formats - Detachable flanges with pre-punched access holes and adjustable depth channels allow user configuration in dozens of potential mounting schemes, including zero-U rackmount capability in the cable management area or other available space within a rack enclosure - Unfiltered electrical pass-through reliably distributes alternate waveform AC power from UPS or generator to supported equipment - Attractive all-metal housing measures only 4.5 inches in depth - Switch-free design prevents the potential for accidental shutoff of connected loads - 6 built-in circuit breakers 2 15A breakers cover 2 C19 outlets 4 10A breakers cover remaining C13 outlets in banks of 4 - 208V AC, 30A, 50/60Hz electrical compatibility System overview - 1U rackmount, 0U vertical rackmount, wallmount or under-counter Power Distribution Unit Voltage compatibility - 208/240V AC Frequency compatibility - 50/60 Hz Output volt amp capacity (VA) - 4992 Output nominal voltage - 208/240V AC Outlet quantity / type - 18 outlets 2 IEC-C19, 4 IEC-C13 (front), 12 IEC-C13 (rear) Overload protection - Yes, via 4 built-in 10A 2 built-in 15A input circuit breakers Maximum input amps - 30A maximum input current per phase Input connection type - NEMA L6-30P (200-250V, 30A) Input cord length - 15 ft. Recommended electrical service - 208V 30A line source